These revolutionary subframes are modular subframes, which means that you can disassemble either one or both of the side plates. You can remove one side-plate without having to remove your engine from the subframe. With this concept, you can easily get to your flywheel, ignition, cylinder and other tight spots.
The left side of the subframe also has an opening at the front (near the flywheel), meaning that taking out your engine has never been easier!
The side-plates are bent on the outer edges (top and bottom) for maximum strength and rigidity.
Material: Stainless Steel 304
Thickness: 3mm
Updated Kickstart and Side-Intake Readiness!
This subframe now contains a bigger slot which makes it easier to access your carburetor when running a Malossi MP-One/Reed Valve Engine or a Polini Evolution Engine. Stock Piaggio engines as well as Polini Speed Engines also have excellent accessibility to the carburetor.
The subframe's side-panels are precision cut and contain holes, slots and openings for kickstart engines and side-intakes.
Updated Mounts for Plastic Side Covers
The Gilera Citta Standard subframe allows you to mount your side covers to the subframe. The subframe comes with:
- 4x Stainless Steel side cover screw holders (3x with horizontal grooves + 1x with a vertical groove)
Updated Exhaust Mounting Slots
Four slots are included in the right side-plate to mount your exhaust or muffler. These slots are now 8mm wide to accommodate both 6mm as well as 8mm bolts.
CENTERPIECES (Aluminium AL 6081-T6)
Each MOPARTS RACING Subframe comes with two centerpieces. You can choose the color of your centerpieces in the drop-down menu.
UPDATED CABLE MOUNT
This updated cable mount has been extended to create more clearance between the subframe and cable, which makes it easier to bolt the brake cable holder-nipple into the subframe's brake cable mount.
A stainless steel 304 (3mm thick) 90-degree cable mount is included in order to mount your rear brake cable to the subframe. This cable mount mounts into the left subframe panel near rear wheel (see pictures).
You will need to either tap some thread into the two holes in the cable mount or mount it with two bolts and nuts.
SIDE-STAND (OPTIONAL)
An optional side-stand is available for €15. This side-stand mounts into the bottom of one of the centerpieces. Please note: the side-stand leg may need to be shortened, or the side-stand's base plate may need to be adjusted and bent a little to fit your subframe and moped.
2x M8x20mm Allenbolts in Stainless Steel A2 (ISO 7380) are included when ordering the additional side-stand.
INCLUDED MATERIALS AND ACCESSORIES
The following bolts and accessories are included with every subframe:
- 8x M8x16mm Allenbolts Stainless Steel A2 (ISO 7380) to mount the two side-panels on the two centerpieces
- 1x Stainless Steel cable mount
ONLY INCLUDED IN GILERA CITTA STANDARD SUBFRAMES
- 8x M3 Stainless Steel A2 Nuts (DIN 985) to mount the side cover screw holders to the stainless steel subframe side-panels
Weight: +-4015 grams excluding side-stand and +-4535 grams including side-stand (Weight based on previous model subframe. This updated version has more cutouts which makes it lighter).