YOU CAN ORDER THIS SUBFRAME NOW AND SHIPPING WILL START AS OF THE 20TH OF AUGUST
SUBFRAME SIDE-PLATES (3mm thick Stainless Steel 304)
These revolutionary subframes are modular subframes, which means that you can diassemble either one or both of the side plates. You can remove one side-plate without having to remove your engine from the subframe. With this concept, you can easily get to your flywheel, ignition, cylinder and other tight spots.
The left side of the subframe also has an opening at the front (near the flywheel), meaning that taking out your engine has never been easier!
The side-plates are bent on the outer edges (top and bottom) for maximum strength and rigidity.
Kickstart and Side-Intake Ready!
Our side-panels are precision cut and have holes, slots and openings in them for kickstart engines (including kickstart-retainer springs) and side-intakes. No need to modify anything! Ready for kick, ready for side-intakes!
Plastic Side Covers
The Gilera Citta Standard subframe allows you to mount your plastic side covers to the subframe and comes with:
- 4x Stainless Steel side cover screw holders (3x horizontal + 1x vertical grooves)
Exhaust Mounting Slots
Four slots are included in the right side-plate to mount your exhaust or muffler. These slots are made for the most common exhaust types and are 6mm wide. If you want to mount a muffler or exhaust that requires an M8 (8mm) bolt, you will need to widen the slot.
CENTERPIECES (Aluminium AL 6081-T6)
Each MOPARTS RACING Subframe comes with two centerpieces. You can choose the color of your centerpieces in the drop-down menu (silver or black).
A stainless steel 304 (3mm thick) 90-degree cable mount is included in order to mount your rear brake cable to the subframe. This cable mount mounts into the left subframe panel near rear wheel.
You will need to either tap some thread into the two holes in the cable mount or mount it with two bolts and nuts.
An optional side-stand is available for €15. This side-stand mounts into the bottom of one of the centerpieces. Please note: the side-stand leg may need to be shortened, or the side-stand's base plate may need to be adjusted and bent a little to fit your subframe and moped.
2x M8x20mm Allenbolts in Stainless Steel A2 (ISO 7380) are included when ordering the additional side-stand.
INCLUDED MATERIALS AND ACCESSORIES
The following bolts and accessories are included with every subframe:
- 8x M8x16mm Allenbolts Stainless Steel A2 (ISO 7380) to mount the two side-panels on the two centerpieces
- 1x Stainless Steel cable mount
ONLY INCLUDED IN GILERA CITTA STANDARD SUBFRAMES
- 8x M3 Stainless Steel A2 Nuts (DIN 985) to mount the side cover screw holders to the stainless steel subframe side-panels
Weight: 4015 grams excluding side-stand and 4535 grams including side-stand